Top
Subscribe for free and never miss a post

Coat / Towel Rack ~ DIY Tool Tutorial

Today is a special day, because I have a project that most anyone can do. Something that can only be done with one power tool. {enter in the Tim the Tool Man laugh} This time, it’s all about the drill…one of your most basic tools that your average household should not be without. Why? Because it has endless uses for a homeowner from tightening up door hinges to building this coat / towel rack I’m going to show you how to DIY today.

One Power Tool Challenge Using a Drill to Build a Coat / Towel Rack by Prodigal Pieces www.prodigalpieces.com #prodigalpieces

So come along with your drill in hand (cordless or corded) and let’s get building!! {applause} You can see our other build plans HERE.

TOOLS & MATERIALS

  • drill
  • 1/2″drill bit
  • 7/64 & 3/8 drill bits
  • 1″ x 6″ x 6′ pine board (you could use a hardwood if you like)
  • 6 wooden Shaker pegs
  • pencil
  • builder’s square
  • tape measure
  • 150 grit sandpaper
  • wood glue
  • stain and/or paint to your choosing
  • foam and/or paint brush
  • goggles
  • gloves
  • a couple of rags
  • 2 – 1 ½” long screws
  • level

First we’re going to head to my proverbial home away from home – any lumber yard / home improvement store). Full of potential as far as the eye can see as long as you know how to maximize all that it has to offer.

For instance, did you know they will cut most anything for you? Yup. When we were doing our faux plank ceiling and wall, they cut all of our 6″ and 8″ strips on this massive saw station for FREE. They were supposed to have charged us 25 cents a cut because we had 8 sheets of ply, but that’s how cool they are!

SHOPPING

We’re going to head to the building department to purchase a basic pine board that measures 1″ x 6″ x 6′. It typically costs a couple bucks, but feel free to choose a hardwood instead.

 

TIP: Don’t just grab the first board you see. Pick one up, look it over for defects or too many knots, and look down it eye-level to see if it’s warped.

Sighting a Wood Board for Warping | prodigalpieces.com

Most of the first boards have been passed up by someone else, so you’ll most likely have to dig one out. Consider it a treasure hunt!

After you’ve got your board, find an associate and ask them if they will cut it in half for you (so you’ll have 2 – 3′ pieces). My guy was not only helpful, but an encouragement in my day when he took a minute to pass along some heed-worthy advice.

DIY TIME

You can find most of the materials at a hardware store, no problem. You can get them in different species like Birch, Oak, or Maple.

Shaker Pegs for Coat Rack | prodigalpieces.com

The end is a different diameter than the rest because it is meant to set in a whole flush to the board for a sturdy application.

Now, after the cool guy at the store has cut your board, you’re ready to start woodworking. YAY! Here is where your math skills come in (yes, even you can do this!)

Your board is now 3′ long and we want our pegs to be evenly spaced, so we’re going to first mark 3″ in from the other edges on both ends. Try to aim for the center, but a rough placement is fine for now.

Marking for Coat / Towel Rack by Prodigal Pieces | prodigalpieces.com #prodigalpieces

Once you’ve marked that, you’re going to have 30″ of space in between that you’ll need to figure the spacing so they’re equally separated. I’ve done the math for you, but you’re basically taking the 30″ divided by the other 4 marks we need to make (we already made two marks of the 6 pegs we’ll be using). That’ll will leave you with 7.5″ spacing (30″ ÷ 4 = 7.5). Staring at your 3″ end mark you already made, measure 7.5″ intervals until you reach the other end mark.

We want our pegs to be centered in this project (you could offset them if you like too), so we need to measure from the top down to get them all set the same.

TIP: As dumb as it may seem, a stated 6″ wide board is not actually 6″, but is actually 5.5″ …duh. Same for the thickness…it’s not really 1″ thick.

NEXT STEPS

Grab your tape measure and find center from top to bottom. You should get 2.75″. Using your builder’s square (a triangle tool), make a cross-mark at the exact center using your 7.5″ placements as a guide.

Using Builders Square | prodigalpieces.com

Now it’s time to drill!  More YAY!

In the materials list I mentioned you would need a ½” spade bit. They look like this:

Spade Bits to Build a Coat / Towel Rack by Prodigal Pieces | prodigalpieces.com #prodigalpieces

Looks like a spade, right? Secure it into your drill and be sure to hand-tighten.

1/2" Spade Bit to Build a Coat / Towel Rack by Prodigal Pieces | prodigalpieces.com #prodigalpiecesThese bits are nice because of the point on the end that allows you to set the bit in place, prepare the hole for the larger bit, and also help prevent the wood from splintering on the back side of your board.

Set in place and drill completely through, making sure to hold the drill level to the board. An offset bit will make your peg rest crooked.

Drilling for Shaker Pegs | prodigalpieces.com

How to Build a Coat / Towel Rack by Prodigal Pieces| prodigalpieces.com #prodigalpieces

 

Continue drilling until all your holes have been made.

Holes for Shaker Pegs on a Coat / Towel Rack by Prodigal Pieces | prodigalpieces.com #prodigalpieces

Lookin’ good, right? We also drill pilot holes for our screws that are to attach the rack to the wall. If you don’t do that, you risk splitting the board.

ALMOST THERE

Using first your  7/64 bit, roughly find center between the two outer holes on both ends and drill through.

Pre-drilling on Coat / Towel Rack by Prodigal Pieces | prodigalpieces.com #prodigalpieces

You could stop there, but if you would like your screw head to be inset, we need to counter-sink the hole. For this we need the 3/8 drill bit and only drill the depth of the screw head. It’s okay if you go a bit over, but be light on the drill. Some even add a wooden screw cap for a finished look, which you could do as well by counter-sinking lower, but I’m trying to keep it simple for you.

Grab your 150 grit piece of sandpaper and hand sand the holes and cut edges and raised grain too.

Sanding Rough Edges of Rack | prodigalpieces.com

When woodworking, it’s always good to do a dry fit before assembly. Ideally, you want to check and make sure everything looks and works like it should.

Gluing Shaker Pegs | prodigalpieces.com

In most cases, I prefer to stain before gluing. Although the bottle says stainable, it really doesn’t end up matching my wood. There’s been several pieces of mine come out with annoying glue spots, so lesson learned.

 

LAYERING

For this project, I’m going to do my layering effect. So to do that, I first apply a coat of stain using my favorite (for now) Early American by Varathane that I’ve used in our bedroom and on our Pottery Barn hack.

Applying Stain to Coat / Towel Rack | prodigalpieces.com

I’ve also decided to give a coat rack I built about 9 years ago that was used before our closet remodel, a new look for our girls’ room. My mom had given me the board and I just added the shaker pegs. Now it needs a new look too.

DIY Coat / Towel Rack by Prodigal Pieces | prodigalpieces.com #prodigalpieces

I stained both racks and let dry for a couple of hours.  You could stop right there as for staining and just add a topcoat, but I like a time-worn look.

Stained Coat / Towel Rack by Prodigal Pieces | prodigalpieces.com #prodigalpieces

Time to glue! Be generous, but not overly. Apply glue to the peg and a bit in the hole so that both surfaces are ready to join.

 

Let dry for a couple of hours, to be sure they’re good to go. Then it’s time to paint! Yay again!

PAINT TIME

The blue is a color chosen by a client for a custom dresser.  I thought it would make such a nice cheery coat or towel rack color. It’s name is Cloudless by Glidden.

Aqua Blue Paint | prodigalpieces.com

After applying a light layer of paint using a dry brush method allow it to dry. It can take about a half hour.

Blue Coat / Towel Rack by Prodigal Pieces | prodigalpieces.com #prodigalpieces

Blue Shaker Pegs | prodigalpieces.com

My girls rack is getting a pink base coat of paint that I custom mixed.

Blue and Pink Shaker Pegs on Coat / Towel Rack by Prodigal Pieces | prodigalpieces.com #prodigalpieces

You might think I would stop there, but I also like to add a light whitewashed effect, like in my layers tutorial using a cheap ceiling paint.

THE REVEAL

Isn’t this DIY coat / towel rack pretty?

Distressed DIY Coat / Towel Rack by Prodigal Pieces | prodigalpieces.com #prodigalpieces

Cottage Style Coat / Towel Rack by Prodigal Pieces | prodigalpieces.com #prodigalpieces

Perfectly suited for coats, towels in your bathroom or poolside. Or, even in your bedroom, like where my girls rack will go. (remodel coming soon!)

Side View of Coat / Towel Rack by Prodigal Pieces | prodigalpieces.com #prodigalpieces

Do you love the layers like I do?

Layered Paint on DIY Coat Rack by Prodigal Pieces | prodigalpieces.com #prodigalpieces

You can also take this same tutorial and use other objects for hooks, like old door knobs, spigot handles, or even old hand-forged nails like I did in our bedroom clothes rack.

Budget-Friendly French Farmhouse Master Bedroom Makeover Final Reveal by Prodigal Pieces www.prodigalpieces.com #prodigalpieces

Now, if you have ANY questions, be sure to ask. Also, if you loved this coat / towel rack project please share! If you would like to have my blue rack, it’s available in my shop.

To get these DIY tips & tricks in your inbox, be sure to sign up for my newsletter. PLUS, you will get your FREE Furniture Buying Checklist and special discount to my shop. Until next time!

blog signature

let's get socialMEWE | PINTEREST | GAB

One Power Tool Challenge Using a Drill to Build a Coat / Towel Rack Tutorial by Prodigal Pieces | prodigalpieces.com #prodigalpieces

Also, more DIY projects like this DIY coat / towel rack:

DIY Barn Wood Shutters from Old Pallets by Prodigal Pieces www.prodigalpieces.com #prodigalpiecesBuild A Farmhouse Bench for Less than $20 - DIY Tutorial by Prodigal Pieces www.prodigalpieces.com #prodigalpieces

Comments

    • Larissa says

      Thank you, Cher! My favorite part of this was that it’s so versatile. No one can have too many hooks! (espcially in our family of 8)

  1. Wendi @ H2OBungalow says

    Yes! I love layers!! …and especially the finished project. I also love a good spade bit for projects. This is such a good basic project that looks anything but basic. Thanks so much for joining in on the One Power Tool Challenge!

    • Larissa says

      Spade bits rock, don’t they? It was fun and so happy to be part of a fun team. 😀

  2. gail says

    Larissa,

    I love all of your great tips for this one tool project challenge! The shaker peg coat rack looks fabulous with the layers of paint.

    pinned!

    gail

    • Larissa says

      Thank you, Gail! I love stain too, but just had to try layers for this project. 🙂

  3. Sherry Fram says

    Both are so pretty but the pink is my favorite, so pretty & girlie!

    • Larissa says

      I’m torn between the two, but pink will look great in my girls’ room. Thank you!

  4. ananda says

    stunning!!! such a beautiful french country feel, and super awesome tutorial Larissa!! xo

    • Larissa says

      Thank you, girl! I can’t wait to see what you whipped up for this challenge. Headed over!

    • Larissa says

      Likewise, lady! I’m headed over to check out your project…can’t wait!

    • Larissa says

      Thank you, Krista! I’m all about stain too, but I think the fact that summer is on the way made me want to go blue. 😉

  5. Christy says

    I love how this turned out, Larissa! The blue is so soft and pretty. Fun to see the action shot too lol! Have a great weekend! XO

Leave a Reply

Your email address will not be published. Required fields are marked *

Client Love

I love it! Larissa is amazing. She listened to what I wanted and then she took care of the rest! This is my second piece I've bought from her and I'm in love! I highly recommend her.

~ Laurel

Prodigal Pieces
2020-03-21T21:34:13-04:00

~ Laurel

I love it! Larissa is amazing. She listened to what I wanted and then she took care of the rest! This is my second piece I've bought from her and I'm in love! I highly recommend her.

I love this cart, it's exquisite. The item was received in extremely secure packaging, no damage to the item. The delivery person was very professional and courteous. Larissa of Prodigal Pieces is so very amazing. A rating of 10 is deserved. Thank you, Larissa.

~ Stephanie

Prodigal Pieces
2020-03-21T21:39:34-04:00

~ Stephanie

I love this cart, it's exquisite. The item was received in extremely secure packaging, no damage to the item. The delivery person was very professional and courteous. Larissa of Prodigal Pieces is so very amazing. A rating of 10 is deserved. Thank you, Larissa.

I should have left this review MONTHS ago! I absolute love this lunch bag. I honestly carry this 5 days a week. It is the perfect size! Not only can you put your lunch in it, it can also hold your book. I enjoy reading at lunch, so I have all I need in one cute bag. Thank you so much Larissa!

~ Mikki

Prodigal Pieces
2020-03-21T21:43:16-04:00

~ Mikki

I should have left this review MONTHS ago! I absolute love this lunch bag. I honestly carry this 5 days a week. It is the perfect size! Not only can you put your lunch in it, it can also hold your book. I enjoy reading at lunch, so I have all I need in one cute bag. Thank you so much Larissa!

Awww…I love this sweet Cat with an attitude!! SO SO adorable! Well worth the money, and he will become a priceless treasure in my home! Thanks Larissa for always making your ideas turn into true treasures!

~ Sharon

Prodigal Pieces
2020-03-21T21:45:37-04:00

~ Sharon

Awww…I love this sweet Cat with an attitude!! SO SO adorable! Well worth the money, and he will become a priceless treasure in my home! Thanks Larissa for always making your ideas turn into true treasures!

Perfect purchase from start to finish! Absolutely adorable piece so creatively thought out. Packed with the greatest of care with lightening fast delivery. Very customer-oriented and friendly crafter. Could not ask for more! Thank you!

~ Deanna

Prodigal Pieces
2020-03-21T21:52:00-04:00

~ Deanna

Perfect purchase from start to finish! Absolutely adorable piece so creatively thought out. Packed with the greatest of care with lightening fast delivery. Very customer-oriented and friendly crafter. Could not ask for more! Thank you!
0
0
Prodigal Pieces